Korman 12" Brake Kit

Original M3 rotors are 11" diameter. Our 12" special alloy dual ventilated front rotors bolt to a lightweight aluminum center hat. Steel adapters provide correct spacing for the original M3 calipers. Rears are solid 12" rotors. 16" wheels required.

P/N 34517100

Korman M3 Stage 1 Brake Kit

Complete bolt on system includes: special gas slotted rotors, front and rear; high performance Korman pads, front and rear; stainless steel brake lines, stainless steel caliper pistons and brake duct kit.

P/N 341122250M3

Korman High Performance Brake Rotors

Choose gas slotted or cross drilled

Computer controlled slotting helps gasses escape from between the pad and rotor mating surfaces reducing pedal effort and fade. Slots are precision cut to the rotor's wear limit, then the entire rotor is gold cadmium plated. Our cross drilled rotors feature a computer controlled pattern with the holes chamfered to the wear limit. These are also finished in cadmium after machining.

Gas Slotted Front Rotor P/N 3411S226455

Gas Slotted Rear Rotor P/N 3421S225507

For crossdrilled rotors substitute "C" for "S" in above numbers.

M3 Brake Cooling Duct Kit

Motorsport designed duct kit clips into the front spoiler utilizing the fog lamp openings for air intake. Plastic ducting then routes air through the inner fender lining. Kit is complete with all mounting hardware and instructions. Easy installation with hand tools.

P/N 34517103

As used on our IMSA cars

A custom made front brake backing plate with sealing lip that precisely fits the inside of the brake rotor. Air is brought in from the front spoiler under pressure and forced into the center of the rotor and out through the vent holes. Provides superior cooling under hard use. Kit includes special brake ducts (install in fog lamp openings), 6 feet of brake duct hose, backing plates with 2.5" hose fitting (3.0" available by request), clamps and instructions. Requires R & R of wheel hubs for installation.

P/N 3451M3RACEK

Ferodo Premier Brake Pads

Meet original BMW specs for all models. Full ABS and ESC (electronic stability control) compatibility. 

• Original Spec reliability and safety
• Full noise reduction specifications
• Extended pad life design

Ferodo DS2500 Compound Brake Pads

This is a race developed pad with characteristics that make it perfect for track days.  Its consistent coefficient of friction at any temperature, low or high, give very predictable braking and great pedal modulation.  This new generation of friction material is very low in compressibility ensuring a firm pedal feel while still providing great life for both disc and pad.  Combing with low dusting of wheels and low noise this product is the brake pad for the driver who demands the ultimate in track day braking performance. 

Hawk High Performance Disc Brake Pads

• Superior Pad Life
• High friction coefficient
• Extremely rotor-friendly
• Pre-bedded at factory
• Ferro-Carbon™ friction material evaluated up to and beyond 1800° F.
• BLUE compound for full race applications

Korman High Performance Brake Pads

Developed for use in our IMSA E30 M3's. Good enough to win both the drivers and the manufacturers IMSA Sport Class Endurance Championships. This pad material is a non-asbestos graphite/metallic formulation. Unlike some racing materials that work well only when hot, the broad coefficient of friction of these pads also enable them to work well under cool, light braking conditions. They are therefore ideal dual purpose pads for both street and club events.

Endurance Racing Brake Pads

Developed by BMW Motorsport specifically for endurance racing. Tested and proven on our IMSA Endurance Series M3 CSL and 328's. Nothing else comes close.

CAR

Stainless Steel/Teflon Brake Lines

Essential for driving schools and highly recommended for all high performance driving. Provides stronger pedal, improved modulation under hard brake usage. Eliminates expansion associated with rubber lines. Kit includes a full set of 6 lines.

P/N 34321086

Stainless Steel Brake Caliper Pistons

Stainless steel transfers less heat to the brake fluid, reducing the risk of fade. Sold in pairs.

Front P/N 34111153000

Rear P/N 34211153002

Super Blue Racing Brake Fluid

A non-silicone high performance dot 4 brake fluid designed for the extreme demands of motor racing, yet perfectly suited for street applications. Sold in 1 liter cans.

P/N SUPER BLUE